Take the worry out of watering with our NEW Watermatic Contractor Kits. In conjunction with a 'Headworks' kit, this drip kit includes everything you need to irrigate a 40sqm garden area with Rain Bird pressure compensated drip tube. Leave admin time behind - all the parts you need are at your fingertips with our comprehensive Contractor Kits.

Included in this kit:

1 x 25mm x 20mm nipple

1 x 30 PSI pressure reduction valve

1 x 19mm director

50m x 19mm low density poly pipe

20 x 19mm x 13mm reducing tees

8 x 19mm x 13mm reducing elbows

5 x 19mm tees

10 x 19mm elbows

4 x 19mm joiners

100 x 19mm ratchet clamps

1 x 100m roll of 13mm Rain Bird XFA drip tube (30cm spacing, 2lph)

6 x 13mm tees

6 x 13mm elbows

2 x 13mm joiners

100 x 13mm ratchet clamps

75 x tie down stakes

1 x flush valve with faucet fitting

1 x vacuum breaker with faucet fitting

Note

The square metre rates are based on an average flow & pressure of 30lpm @300kpa